Notes:
- When used for mechanical supports, load capacities of brackets and fittings should be in compliance with the American Standard Code for Pressure Piping.
- Clamps are designed to be used with W, M, S & HP Shape beams, Standard C & Misc. MC Channels, Angles & Structural Tees.
- Clamps must be used in pairs where indicated.
- For beam clamps with HG finish, standard hardware is EG finish.
- For optional stainless steel hardware, please contact the factory for availability.
Weld is not continuous it is either 11â/4″ (32) – 13â/4″ (45) long or 2 spot welds. All welds are on the top and bottom.
For beams under 7/8″ (22) thick flange.
| Part No. | Finish | Size | Weight | Box Qty. |
| P1651S | GR | 1/2″-13 | 130.00 | 10 |
| P1651AS | GR | 5/8″-11 | 130.00 | 10 |
| P1650S | GR | 3/8″-16 | 100.00 | 10 |
| P1652S | GR | 5/8″-11 | 160.00 | 10 |
| P1650AS | GR | 1/2″-13 | 100.00 | 10 |
| P1649S | GR | 5/16″-18 | 67.00 | 10 |
| P1653S | GR | 3/4″-10 | 160.00 | 10 |
| P1648S | GR | 1/4″-20 | 67.00 | 10 |
| P1649AS | GR | 3/8″-16 | 67.00 | 10 |
| P1651S | EG | 1/2″-13 | 130.00 | 10 |
| P1651AS | EG | 5/8″-11 | 130.00 | 10 |
| P1652S | EG | 5/8″-11 | 160.00 | 10 |
| P1649S | EG | 5/16″-18 | 67.00 | 10 |
| P1650S | EG | 3/8″-16 | 100.00 | 10 |
| P1649AS | EG | 3/8″-16 | 67.00 | 10 |
| P1650AS | EG | 1/2″-13 | 100.00 | 10 |
| P1653S | EG | 3/4″-10 | 160.00 | 10 |
| P1648S | EG | 1/4″-20 | 67.00 | 10 |
| P1652S | HG | 5/8″-11 | 169.60 | 10 |
| P1651S | HG | 1/2″-13 | 137.80 | 10 |
| P1651AS | HG | 5/8″-11 | 137.80 | 10 |
| P1650S | HG | 3/8″-16 | 106.00 | 10 |
| P1650AS | HG | 1/2″-13 | 106.00 | 10 |
| P1649S | HG | 5/16″-18 | 71.00 | 10 |
| P1649AS | HG | 3/8″-16 | 71.00 | 10 |
| P1648S | HG | 1/4″-20 | 71.00 | 10 |
| P1653S | HG | 3/4″-10 | 169.60 | 10 |
| P1651S | SS | 1/2″-13 | 130.00 | 25 |
