Conduit Support: The Complete Guide to Mounting, Clamping, and Hanging Conduit
July 16, 2026
Every conduit run — rigid, IMC, or EMT — needs to be supported at intervals that meet code and keep the run straight, level, and free of stress on fittings and terminations. The right conduit support depends on where the run travels: along a wall, suspended from a ceiling, grouped with other conduit in a […]
Read More
Unistrut Beam Clamps: The Complete Guide to Structural Steel Attachment for Industrial Support Systems
July 9, 2026
Attaching pipe, conduit, or cable tray support directly to structural steel without drilling or welding comes down to one component: the beam clamp. Unistrut beam clamps bolt onto the flange of a wide-flange beam, channel, or angle and give you an instant, load-rated attachment point for Unistrut channel, threaded rod, or hangers without ever touching […]
Read More
Flex Strut Distributor: What Contractors and Engineers Should Know When Sourcing Wholesale
June 15, 2026
Steinco Industrial Solutions is a trusted flex strut distributor carrying the complete Flex-Strut product line for wholesale procurement. The catalog covers channel systems, fittings, concrete inserts, telescoping struts, and specialty accessories. Contractors and engineers gain access to products and dedicated project support through a single source. Sourcing through an authorized channel directly impacts product reliability, […]
Read More
Unistrut Channel Sizes Compared: Matching the Right Series to Your Load Capacity and Application
June 8, 2026
Selecting the right unistrut channel sizes is one of the most practical decisions an engineer or contractor makes on a structural project. The series you choose determines load capacity, allowable span, and compatibility of fittings across the entire installation. This guide compares every major Unistrut channel series so the right choice is clear from the […]
Read More
Unistrut Channel Dimensions: Technical Specs for Width, Depth, Slot Opening, and Wall Thickness
June 1, 2026
Unistrut dimensions are the foundation of every metal framing decision an engineer or contractor makes on an industrial project. The standard P1000 channel measures 1-5/8″ wide by 1-5/8″ deep, with a 7/8″ slot opening and a 12-gauge (0.109″) wall thickness. Those four numbers define which hardware fits, what loads the channel can carry, and whether […]
Read MoreFiberglass Strut and Fittings: The Non-Metallic Framing System for Corrosive Environments
May 25, 2026
In standard industrial environments, steel strut channel performs exceptionally well. But in corrosive, electrically sensitive, or chemically aggressive settings, metal channel can corrode, conduct electricity, or react with process chemicals — and that’s where fiberglass strut and fittings become the clear choice. This guide covers everything you need to know about fiberglass framing systems: what […]
Read MoreFlex-Strut: The Versatile Metal Strut System for Complex Industrial Installations
May 14, 2026
When standard rigid strut channel isn’t flexible enough for your installation — literally or figuratively — Flex-Strut delivers the answer. Manufactured by Flexstrut Inc., this system offers a wider range of channel profiles, unique flexible products, and a comprehensive fitting ecosystem that handles applications where conventional strut falls short. Steinco Industrial Solutions carries the complete […]
Read MoreRooftop Supports for Pipes, Conduit, and HVAC: A Buyer’s Guide
May 6, 2026
Rooftop installations are among the most demanding applications for any support system. Exposure to UV radiation, temperature extremes, wind loads, and rain means your rooftop supports need to be built to last — and installed in a way that doesn’t compromise your roof membrane. This guide covers the key considerations for rooftop pipe, conduit, and […]
Read More