Standard Dimensions:
- Hole Diameter: 9/16″ (14mm)
- Hole Spacing (From End): 13/16″ (21mm)
- Hole Spacing (On Center): 1-7/8″ (48mm)
- Width: 1-5/8″ (41mm)
- Thickness: 1/4″ (6mm)
Note:
- When used for mechanical supports, load capacities of brackets and fittings should be in compliance with the American Standard Code for Pressure Piping.
- Safety Factor – 2-1/2
- When installed in inverted position use 60% of loads shown.
| Part No. | Finish | Size | Weight | Box Qty. |
| P2513 | GR | 6″ | 161.00 | 20 |
| P2516 | GR | 24″ | 461.00 | 15 |
| P2515 | GR | 18″ | 361.00 | 10 |
| P2514 | GR | 12″ | 261.00 | 20 |
| P2515 | PG | 18″ | 361.00 | 10 |
| P2514 | PG | 12″ | 261.00 | 20 |
| P2516 | PG | 24″ | 461.00 | 15 |
| P2513 | PG | 6″ | 161.00 | 20 |
| P2514 | HG | 12″ | 276.70 | 20 |
| P2515 | HG | 18″ | 382.70 | 10 |
| P2516 | HG | 24″ | 488.70 | 15 |
| P2513 | HG | 6″ | 170.70 | 20 |
| P2515 | SS | 18″ | 361.00 | 10 |
| P2513 | SS | 6″ | 161.00 | 20 |
| P2514 | SS | 12″ | 261.00 | 20 |
| P2516 | SS | 24″ | 461.00 | 10 |
