General
The Pre-Engineered office system shall be SS3000 as manufactured by Starrco Company, Incorporated, based out of St. Louis, Missouri. Since 1965, Starrco has been noted as a designer and manufacturer of quality pre-engineered office systems.
Made from sturdy, dependable materials, these modular office wall systems provide personnel with a comfortable work environment. See below for detailed specs about this office system from Starrco.
Wall Panels
| SP Panels | Wall panels shall be a sandwich-type construction with 1/8" vinyl covered hardboard laminated to both sides of a 2 3/4" thick noncombustible 1 lb. density expanded polystyrene core. Total panel thickness is 3". Insulation value R-13. |
|---|---|
| DL Panels | Wall panels shall be a sandwich-type construction with ½" vinyl covered gypsum board laminated to both sides of 2" thick noncombustible 1 lb. density expanded polystyrene core. Total panel thickness is 3". Panel is Class A noncombustible when tested in accordance to ASTM-E-84. Insulation value R-11. |
| SC Panels | Wall panels shall be a sandwich-type construction with 1/8" vinyl covered hardboard laminated to 5/8" high density particle board on both sides of noncombustible 1 lb. density expanded polystyrene core. Total panel thickness is 3". Insulation value R-10. |
Optional Finishes
Optional wall coverings available include painted steel, painted aluminum, fiberglass reinforced plastic (FRP), cork, Melamine, PVC, etc.
Framework
| Wire Studs | Studs shall be extruded from 6063 aluminum alloy with T6 temper. Wire studs allow for electrical, data processing and communication lines to be run vertically in a raceway accessible from a removable cover plate. The stud is designed in two pieces that allows both sides to be wired with electrical devices and communication receptacles. Design also gives system the capability of removing a panel without disturbing the adjacent panels. |
|---|---|
| Floor and Ceiling Track | These shall be extruded from 6063 aluminum alloy with T6 temper. Track shall be precut and mitered at the factory to eliminate the need for field cutting. Overall thickness of system at floor and ceiling crack is 3 7/16". |
| Finish | The aluminum extrusions are available in a "Khaki" Baked-on Painted Finish. Special color painted finishes are available. |
| Height | The system is available in the following standard heights: 8', 9', and 10'. Systems over 8' tall may have spliced panels depending upon the panel construction or finish. |